Pricing will be adjusted to $43 by End of March.
Back in stock!
1/8” Carbide Compression End Mill For 3/4” plywood
Single flute.
Dia : 0.125” or 3.175mm
Length of cut : 0.865” or 22mm
Shank dia 1/8”
This will allow you to cut 3/4” wood or plywood in 1 pass.
The up cut portion will allow you to cut thin plastic ( thinner than 0.125” ) as well.
Suggested feed and speed :
Wood 11,000-16,000RPM , 50-70ipm if full depth
Plastic 8,000-10,000RPM , 80-100ipm at 0.030” depth of cut.